Posted on January 22, 2026
Tieback anchors are specifically designed to secure suspended equipment like window washing stages or davit systems. They provide a high-strength, permanent attachment point on the roof that ensures the primary and secondary safety lines are […]
Read More
Posted on January 22, 2026
Thermal bridging occurs when heat or cold is transferred through the metal post into the building, causing condensation and structural damage. All FLS Tieback Anchor HSS cavities are filled with polyurethane insulation to counter this […]
Read More
Posted on January 22, 2026
For window washing and rope descent systems, ANSI/IWCA I-14.1 and OSHA requires that anchors be capable of supporting 5,000 pounds in any direction a load could be applied. Our anchors are tested to withstand 5,400 lbf without fracture, providing an […]
Read More
Posted on January 22, 2026
Yes, we offer several retrofit mounting options, including “Bolt On” and “Chemical Adhesive” designs. Our Bolt On anchors clamp directly to existing structural steel using proprietary BeamClamp connectors, while Chemical Adhesive anchors fastens onto concrete roof slabs of […]
Read More
Posted on January 22, 2026
Filling the hollow structural section of the anchor with polyurethane insulation prevents the buildup of internal condensation. This protects the anchor from internal corrosion and maintains the thermal efficiency of the building envelope, which is a […]
Read More
Posted on January 22, 2026
According to OSHA and ANSI, anchors used for suspended maintenance must be inspected annually by a Competent Person. For systems used in rope descent, a 10-year recertification by a Professional Engineer or a Qualified Person […]
Read More
Posted on January 22, 2026
Yes, our anchors are Cal/OSHA compliant, resisting up to 5,400 lbf in any direction without fracture or pullout and 2,500 lbf without any permanent deformation.
Read More
Posted on January 22, 2026
We offer five mounting options: Bolt Around for new builds, Bolt On for retrofits, Welded for both new and retrofits, Chemical Adhesive for concrete roof slabs, and Embedded for cast-in-place concrete slabs.
Read More
Posted on January 22, 2026
You can choose from three main attachment options: a stainless steel U-Bar, a tapped hole for mounting horizontal lifeline components, or a forged D-ring.
Read More
Posted on February 5, 2026
A Qualified Person: such as a structural engineer: must verify the roof can handle the concentrated 600+ lb load of the assembly. This is especially critical for older buildings or lightweight roof decks.
Read More