Versatile, Non-Penetrating, OSHA Compliant Skylight Covers

Our skylight screens provide cost effective and easy-to-install protection from falls through skylights. Skylight screens that are designed and installed by Flexible Lifeline Systems are OSHA compliant and provide protection against legal liability.

Our screen-style skylight covers do not penetrate the roof or skylight curb membranes, thereby maintaining the integrity of the roof warranty. Installation of FLS skylight screens eliminate the inherent danger that exists of falls through unguarded skylights.

Complete Solution for Every Roof Opening

FLS Skylight Screens are available in a variety of sizes, shapes, and material to fit almost any roof opening as defined by OSHA, including smoke vents. Optional galvanized or stainless steel screens are durable and weather-resistant for every installation type, including curb style skylight installations, standing seam metal roof skylights, and for rib/corrugated metal roof skylights.

Simple, Secure, Non-Perforating Installation

Installation of FLS Skylight Screens is compliant with OSHA regulations which require fall protection around roof openings that must not negatively affect the strength and soundness of the skylight. Our patented installation system will not affect the integrity of the roof hole, whether one of our standard sizes or custom fitting.

Experts in Skylight Fall Protection

Maximizing the safety provided by skylight screens requires expert planning and installation. As your turnkey fall protection provider, FLS provides one manager with total accountability who will guide your project every step of the way.

OSHA Skylight Requirements

A fall through an unguarded skylight usually results in death or serious injury. This is why the Occupational Safety and Health Administration (OSHA) requires that employers provide fall protection as stated in the regulations listed below. FLS Skylight Screens exceed the OSHA requirement for weight bearing of 200 pounds to any one area of the screen.

1910.28(b)(3)(i)

Each employee is protected from falling through any hole (including skylights) that is 4 feet (1.2 m) or more above a lower level by one or more of the following:
1910.28(b)(3)(i)(A)
Covers;

1910.28(b)(3)(i)(B)

Guardrail systems;

1910.28(b)(3)(i)(C)

Travel restraint systems; or

1910.28(b)(3)(i)(D)

Personal fall arrest systems.

OSHA Regulation 29 CFR 1926.501 Duty to Have Fall Protection

(a) (2) The employer shall determine if the walking/working surfaces on which the employees are to work have the strength and structural integrity to support employees safely. Employees shall be allowed to work on those surfaces only when the surfaces have the requisite strength and structural integrity.

(b) (4) Holes (i) Each employee on walking/working surface shall be protected from falling through holes (including skylights) more than 6 feet above lower levels by personal fall arrest systems, covers, or guardrail systems erected around such holes. (ii) Each employee on walking/working surface shall be protected from tripping or stepping in the holes (including skylights) by covers.

download literature

Rooftop Fall Safety Solutions

Select below for more information about specific rooftop safety solutions.

Multi Span Lifelines

Flexible Lifeline Systems has designed Multi Span Lifelines to provide safe and effective fall protection in a variety of applications for over 20 years.

Learn More

Vertical Lifelines & Ladder Davits

The two most common solutions for ladder fall arrest systems are cable based vertical lifelines and ladder davits with self-retracting lifelines.

Learn More

FlexTraxx

The FlexTraxx system provides a secure attachment eye that combines with the weatherproof characteristics of a traditional ridge piece.

Learn More

Freestanding Rooftop Anchor

The freestanding rooftop anchor provides worker safety at heights where there is a requirement to access flat roofs or structures.

Learn More

Flexguard Permanent

A modular, freestanding and permanent guardrail system that does not penetrate the roof membrane.

Learn More

Flexguard Portable

A mobile guardrail system that is made up of modular sections and weights that can easily be assembled or moved.

Learn More

Flexguard Parapet

A railing system where the uprights are directly screwed to the rooftop parapet reducing cost while providing fall protection.

Learn More

Flexguard Topfix

Flexible Lifeline System’s metal roof railing solution that is pre-engineered to work with both standing seam and corrugated roof panels.

Learn More

FlexLine Warning Line System

On elevated work surfaces, the FlexLine Warning Line System can be used to mark off a safe work area.

Learn More

FlexWalk With Guardrail

The FlexWalk with Guardrail system from Flexible Lifeline Systems is a fall protection solution consisting of walkway and guardrail which can be installed quickly and easily on a wide variety of roofs.

Learn More

FlexWalk

The FLS Modular Rooftop Walkway provides a safe walking surface that protects the rooftop and any workers who require roof access.

Learn More

Skylight Guardrails

The FLS Skylight Guardrail is a freestanding fall-protection solution for use around skylights, roof lights, and dome lights.

Learn More

Custom Fall Protection Solutions

We can design and manufacture custom solutions per your requirements.

Learn More