Preassembled Safety Railing Kit

The FlexKit railing system is an easily assembled, sturdy railing system that requires no welding or threading. Installation is fast due to the system’s pre-assembled components. Elbows, crosses and tees arrive prefitted to the upright pipes.

Easy and Quick Setup

Assembly of the he FlexKit railing system only requires a standard hex tool to tighten the set screws. Almost any standard railing configuration can be achieved with FlexKit by ordering the right combination of kit components. FlexKit can be secured using bolts or chemical anchors, and FlexKit rails can be cut where shorter sections are needed.

Everything you need for the FlexKit railing system arrives included in a single box. The railing system is broken down and shipped flat to save on freight costs.

flexkit-railing-system-4
FlexKit Benefits

There are multiple unique benefits to the FlexKit safety railing system including the following:

  • FlexKits are available immediately.
  • FlexKit meets or exceeds OSHA and BOCA standards
  • Corrosion resistant, reliable and durable fittings
  • Pipe is powder coated in safety yellow for visibility
    (Also available in galvanized Iron/Steel or Aluminum)
  • Easily assembled with a standard hex tool
  • Low system cost

flexkit-railing-system-1
OSHA Compliant

FlexKit safety railing systems utilize reliable fittings that exceed OSHA requirements for safety railings. The railings ship standard in Safety Yellow, are 42” inches high and have 6 feet of spacing between posts. The pipe has an outside diameter of 1.90”.

Toeboard Adapter
FlexKit safety railing also meets OSHA requirements for toe boards. The stainless steel toeboard hardware is included in with FlexKit and is easy to install with no drilling or welding. The flange attaches directly to the toe plate for greater rail stability.

flexkit-railing-system-3
Railing is frequently required to meet safety standards in both warehouses and on loading docks. Hazards are abundant in both areas and safety railing can be used for a number of different purposes. Safety railing can be used to protect people from falling from the end of the dock where truck pulls up. And safety railing can be used to protect pedestrians and workers from forklifts and other moving warehouse vehicles.

flexkit-loading-dock-railing-system
Loading Dock Railing

The FlexKit railing system is an ideal solution for loading docks where damaged railing is commonplace. It only takes a moment for a distracted truck driver to damage the integrity of your loading dock railing. Here are a few of the advantages FlexKit offers:

  1. FlexKit railing is pre-powder coated in highly visible safety yellow.
  2. A galvanized coated layer is underneath the paint to protect the railing if the paint is chipped.
  3. FlexKit Sections are easily to ordered and installed. Each kit arrives partially preassembled.
  4. It’s easy to replace damaged railing sections. When railing is damaged, a replacement section can be quickly ordered and implemented without expensive welding work.

flexkit-warehouse-railing-system
Warehouse Railing

For warehouse safety, railing can be installed very quickly. The uprights arrive preassembled. Simply mount the bases to the floor, attach the horizontal railing pipes and the railing is ready for use. Each section is designed with industry standard 1-1/2″ pipe, exceeding OSHA top rail load requirements.

The railing can also be easily removed when necessary. This is very helpful in warehouses where safety railing sometimes needs to be temporarily removed for access. The base of the railing stays in place so the railing can be reattached once access in no longer required and safety parameters need to be reestablished.

INDUSTRIAL FALL SAFETY SOLUTIONS

Select below for more information about specific industrial safety solutions.

Catwalks / Elevated Walkways

Accessing sorters and conveyors for inspection or maintenance always presents fall safety challenges.

Learn More

Vertical Lifelines & Ladder Davits

The two most common solutions for ladder fall arrest systems are cable based vertical lifelines and ladder davits with self-retracting lifelines.

Learn More

The FLS range of tie off anchors provide a cost effective solution to fall hazards both in general industry and building maintenance applications.

Learn More

Work Platforms

In order to prevent falls, FLS Work platforms are designed to provide employees with access to a work deck with railing.

Learn More

FlexRail – Industrial

FlexRail enclosed rigid rail track provides excellent linear fall arrest capability with minimal fall distances.

Learn More

FlexBridge - Industrial

A rigid rail enclosed track fall protection system in a bridge format.

Learn More

Industrial Horizontal Lifelines

The FLS flexible horizontal lifeline is a fall arrest alternative used in a wide variety of industrial applications.

Learn More

Multi Span Lifelines for Overhead Cranes

Maintaining overhead cranes or emergency repairs when cranes break down often expose workers to falls while performing their work.

Learn More

FlexKit

A ready-to-ship railing system that arrives with pre-assembled components making for a quick and easy installation.

Learn More

FlexGuard Ground Based

Our ground based FlexGuard railing solution has unmatched versatility and is suited to a variety of environments.

Learn More

Self Closing Gates

Flexible Lifeline Systems has a complete line of self closing safety gates engineered to allow traffic flow while providing hazard protection.

Learn More

Custom Fall Protection Solutions

We can design and manufacture custom solutions per your requirements.

Learn More