Portable Anchor Points For Rooftops

The freestanding rooftop anchor provides worker safety at heights where there is an occasional or temporary requirement to access flat roofs or structures. This portable, non-penetrating, deadweight anchor system can be used on rooftops that have a pitch of 5 degrees or less.

Easy to Install

The system can be set up easily and quickly, providing OSHA compliant fall protection when and where it’s needed. The allen key and bar which are included in the kit are the only tools needed for setup. No additional tools or specialized labor is required.

No individual component of the Freestanding Rooftop Anchor system weighs more than 56 lbs and each weight includes built-in handles so it can be easily deployed and quickly put to use.

Fall Protection Where You Need It

FLS Freestanding Rooftop Anchors are normally used where it is impractical to install traditional fixed posts or rigid anchor posts to the roof or supporting structure. The anchor system has been tested for use on single ply membrane rooftops, as well as mineral felt, concrete, and stone chipping (brushed) rooftops. The system can be used in both wet and dry conditions.

Versatile Fall Protection

Freestanding Rooftop Anchors and be used for fall arrest or for fall restraint. The system provides an OSHA compliant fall arrest anchor for a single worker. In the event of a fall, the rubber coating around each base weight spreads the load of the fall over 20 square feet, protecting both your worker and your rooftop. The anchor can also be setup as a fall restraint system for two workers by preventing them from reaching the fall hazard.

Portable Anchor Point Features

  • Installs on nominally flat or up to 5 degree sloped roofs
  • Non-penetrating design rests on roof surface
  • Integrated handles for easy transport
  • Compatible with fall arrest connecting systems
  • Portable and reusable
  • Can be used for temporary or permanent fall protection

Portable Anchor Specifications

  • 4′-6″ x 4′-6″
  • Must be used 10′ from fall hazard
  • Engineered for use with lanyards that have a 900 lb maximum arresting force
  • Galvanized to BS EN ISO 1461
  • Rubber bonded weights each have over 100 molded-in suction cups for maximum grip
  • OSHA Compliant

Expertise In Portable Fall Arrest Anchors

Maximizing the fall protection provided by freestanding rooftop anchors requires the proper harnesses, lanyards, and training. FLS is your turnkey fall protection provider.

Contact us today for more information on our portable energy absorbing roof anchors.

Rooftop Freestanding Anchor Animation

Rooftop Fall Safety Solutions

Select below for more information about specific rooftop safety solutions.

Overhead Horizontal Lifelines

FLS cable based flexible horizontal lifeline fall arrest systems engineered to minimize fall distance and provide pass thru capability with longer spans and uninterrupted lengths.

Learn More

Rooftop Crossover Platforms

A modular solution for safely crossing obstructed rooftops. There are multiple risks to rooftop workers that don’t involve falling over the edge.

Learn More

Vertical Lifelines & Ladder Davits

The two most common solutions for ladder fall arrest systems are cable based vertical lifelines and ladder davits with self-retracting lifelines.

Learn More

Vertical Lifelines & Ladder Davits

The two most common solutions for ladder fall arrest systems are cable based vertical lifelines and ladder davits with self-retracting lifelines.

Learn More

FlexTraxx

The FlexTraxx system provides a secure attachment eye that combines with the weatherproof characteristics of a traditional ridge piece.

Learn More

Freestanding Rooftop Anchor

The freestanding rooftop anchor provides worker safety at heights where there is a requirement to access flat roofs or structures.

Learn More

Flexguard Permanent

A modular, freestanding and permanent guardrail system that does not penetrate the roof membrane.

Learn More

Flexguard Portable

A mobile guardrail system that is made up of modular sections and weights that can easily be assembled or moved.

Learn More

Flexguard Parapet

A railing system where the uprights are directly screwed to the rooftop parapet reducing cost while providing fall protection.

Learn More

Flexguard Topfix

Flexible Lifeline System’s metal roof railing solution that is pre-engineered to work with both standing seam and corrugated roof panels.

Learn More

FlexLine Warning Line System

On elevated work surfaces, the FlexLine Warning Line System can be used to mark off a safe work area.

Learn More

FlexWalk With Guardrail

The FlexWalk with Guardrail system from Flexible Lifeline Systems is a fall protection solution consisting of walkway and guardrail which can be installed quickly and easily on a wide variety of roofs.

Learn More

FlexWalk

The FLS Modular Rooftop Walkway provides a safe walking surface that protects the rooftop and any workers who require roof access.

Learn More

Skylight Guardrails

The FLS Skylight Guardrail is a freestanding fall-protection solution for use around skylights, roof lights, and dome lights.

Learn More

Custom Fall Protection Solutions

We can design and manufacture custom solutions per your requirements.

Learn More