Self Closing Gates

 Yes, our self-closing gates mount seamlessly with the entire FlexGuard line. They are made from the same industrial-grade tubing, ensuring a consistent look and a high-strength connection across your entire fall protection system.

While our standard finish is galvanized metal for maximum durability, we can powder-coat our gates in any RAL color. This is often used for high-visibility “safety yellow” requirements or to coordinate with the building’s existing aesthetic.

A double gate should be used for any opening wider than 39 inches, up to 72 inches. This is common in loading zones or large equipment access areas. The double gates are secured with three U-brackets per post to ensure they remain aligned and durable under frequent use.

 The gate includes a built-in stopping mechanism that only allows it to open in one direction—away from the hazard. This ensures that even if a worker leans against the gate from the protected side, it will not swing outward over the edge or ladderway. 

 Our gates are built for durability using galvanized, corrosion-resistant components. The spring itself is typically manufactured from stainless steel to prevent rust and ensure the gate continues to close securely even in extreme heat, cold, or high-moisture environments.

 No, FLS self-closing gates utilize a universal U-bolt connection. This hardware can be fastened to any 1-inch to 1.5-inch stringer or post, regardless of whether it is flat, square, or round. Using standard contractor tools, the gates can be cut to size and installed on-site in a matter of minutes.

Yes, our single industrial safety gates are fully adjustable for openings between 30 and 39 inches. If you have a larger opening, such as for a pallet drop or a large machinery access point, we offer double-gate configurations that can secure openings between 3 and 6 feet while maintaining the same self-closing reliability.

OSHA 1910.28(b)(3)(iv) explicitly states that ladderway floor holes and platform holes must be protected by a guardrail system. While chains or offset entries were previously common, a self-closing gate is the most reliable solution because it removes the “human element.” A gate automatically resets to the protected position, whereas a chain only works if the worker remembers to re-hook it.