 |
Wingrip Single Point Anchor System
The FLS Wingrip® Single Pad System was developed to greatly increase the efficiency of workers during short duration work. The vacuum pad is powered by compressed air or a nitrogen bottle, without the need for batteries, electrical cables or external equipment. Primarily used for light maintenance, FLS Wingrip® systems operate inside or outdoors and provide access to the entire spectrum of aircraft shapes and sizes. Your workers will be able to work with confidence and efficiency in any environment.
The Wingrip® Single Pad Anchor System is an easily installed and highly portable single-user system that provides a fall protection anchor point for a single worker on wings, fuselage or stabilizers.
|
|
 |
|
Wingrip® Specifications
The WINGRIP® vacuum pad is powered
by compressed air or nitrogen, without the
need for batteries, electrical cables or large
equipment. Being completely non-electrical
and with no metal on metal moving contact,
the system is inherently safe with fuel tanks
open. If the air/nitrogen supply should fail,
an audible alarm sounds and the Wingrip®
vacuum pad will maintain a safe working
vacuum for at least 20 minutes.
Wingrip® is suitable for wet or dry surfaces
and can be used inside hangars or outside.
Installation and removal are safe and
straightforward for a single worker to carry
out, as vacuum pads weigh less than 14
pounds.
|
|
|
 |
|
| Wingrip® Features |
|
 |
Lightweight, portable, easy to install and simple to use |
|
|
|
Independently tested and rated for fall arrest and fall restraint |
|
|
|
Inherently safe – even with fuel tanks open |
|
|
|
Suitable for wet or dry surfaces, inside hangars or out |
|
|
|
Low operating cost |
|
|
The adjustable work positioning rope provides
a safe working radius of 10 feet and is
particularly helpful to locate the worker for
comfortable hands-free working. Where necessary,
two vacuum pads can also be used
to triangulate and fix the worker’s position.
Why FLS?
Maximizing the fall protection provided by WINGRIP® requires proper setup and training. FLS provides full technical support and training upon delivery. One manager with total accountability handles your project. Competitors can’t compare with FLS’ turnkey costs and services. |
|
|
